Coding dongle deactivation automatic parking brake in P or key removal for Mercedes-Benz GLB-Class X247

• With this dongle it is possible to prevent the automatic actuation of the parking brake in transmission position P or by removing the ignition key
• Suitable for the following vehicles:
  
• A Class Series 177
  
• EQA Class Series 243
• B Class Series 247
• CLA Class Series 118
  
• C Class Series 205
  
• CLS Series 218
• E Class Series 213
• E Class Cabrio Series 238
• CLS Class Series 257
• GLA Class H247 Series 247
  
• GLB Class X247 Series 247
• GLC Class X253 Series 253
• GLC Class C253 Series 253
• EQC Class Series 293
• GLE Class V167 Series 167
  
• GLE Class C167 Series 167
• GLS Class X167 Series 167
  
• G Class Series 463 ab 2018
• S Class Series 222
• S Class Coupe und Cabrio Series 217
• V Class Series 447
• Sprinter Series 907 / 910
  
• Hymer B Class
  
• Hymer ML-T
• Hymer Tramp S
• Hymer Free S
• Other modesl on request
  
• Activation as well as deactivation via diagnostic interface of your vehicle
• Simply connect the adapter to the OBD interface of the vehicle - Done!
• After successful coding, the parking brake is not automatically activated when changing to transmission position P or by removing the ignition key.
• The function is not permanently activated, it can be reactivated with the dongle at any time
• Ex. 1. use = deactivation of automatic parking brake in P or by removing the ignition key
• 2. reset to factory settings (activation of automatic parking brake in P or by removing the ignition key)
• 3. use = deactivation of automatic parking brake in P or by removal of ignition key
• 4. etc.

Scope of delivery:

• 1x Coding dongle
  

Note:

• The coding dongle can only be used for one vehicle
• An electric parking brake is a prerequisite

Suitable for:

Make: Mercedes-Benz

Model: GLB-Class X247

Estimated installation time: -