STROKOVNO SVETOVANJE
od 9. do 15. ure
Ni izdelkov
Brezplačna dostava! Dostava
0,00 €Cena skupaj
Izdelek je bil uspešno dodan v vašo košarico
( ks)
Nakupite še za in imate brezplačno dostavo
Imate brezplačno dostavo!
*329 582
WISEFAB front track kit for Honda S2000
Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
Nov izdelek
WFS22
Pripomočki
Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
Product Features:
- To suit Nissan GT-R
- Corrected roll centre
- Corrected camber curve
- Corrected anti-Squat
- Weight saving over OEM components
- High strength steel construction
- Rod end/spherical joints, no rubber bushes
Weight reduction over original components and still maintaining required strength and stiffness
7075-T6 aluminium billet CNC knuckles and CrMo arms with optimized design and all double shear connections provide low weight and high strenght.
CrMo rod ends and sphericals used instead of rubber bushings
Easy camber adjustment on knuckle
Camber can be adjusted easily on trackside in a few minutes
Bump steer adjustment
Bumpsteer is adjustable by tie rod height on knuckle
Quicker steering ratio.
Steering ratio is slightly quicker compare to original
Other components, packaging and clearance.
This kit assumes coilovers
Minimum rim size is 17“
Track width is close to original, So similar size and offset rims can be used as with original suspension. We have tested 18x10 ET35, 275/35 R18 with wider fender flares
Original wheel speed sensor can be used
AP1 an AP2 generation compatibility
- Napiši mnenje
Podatki
| Vrsta | Lock kit |
Did not find your question?
Enter new question Do you have a question? Search for an answer.
| Znamka | Model | Sprememba |
|---|---|---|
| Honda | S2000 | AP (1999 - 2003) |
| Honda | S2000 | AP Facelift (2003 - 2009) |
Ostali deli za to vozilo
Powermax prinaša več moči za žepno raketo Fiat 500 Abarth.
Garrett Motion je globalni tehnološki vodja na področju prisilnega polnjenja. Tehnologije, razvite v dirkalnikih Formule 1, uporabljene tudi v običajnih serijskih vozilih.
2026 race-shop
WATCHDOG_OK
