TA-Technix airride kit with air management for Opel Kadett E-CC / Cabriolet

TA Technix Air Damper Set + TA Technix Air Management with Air Generation Kit

The multi-function display is operated intuitively by means of a freely positionable rotary knob / potentiometer.
The electronic, pressure-based control unit has the option of storing 4 freely configurable bellows pressures / ride heights on an axle-by-axle basis.

With the help of the enclosed operating instructions and the simple menu navigation, the following additional functions, among others, can be used:

- 4 driving heights
- Adjustment of the driving height with ignition on and off (autolevel)
- Axially adjustable excess bellows pressure for optimum adjustment of the ride height
- Protection against foreign use (offers the possibility to lock the system at the desired ride height within 3 seconds)
- maximum as well as minimum tank pressure (adjustable)
- Protection of the on-board power supply through definable upper and lower limits of the on-board voltage
- freely configurable valve times
- Modification of the control unit lighting / ECU lighting
- Minimum pressure of the front and rear axle (falling below the minimum pressure triggers a visual warning signal and is necessary for TÜV registration)

includes:
- Multifunctional display
- Rotary knob / potentiometer including 4 caps in black, red, blue and silver
- anti-reflective foil
- prefabricated wiring harness
- Control unit / ECU
- 3 update cables
- TA Technix 444C compressor in chrome
- 19 litre chrome tank
- Electronics set including compressor relay
- Fuse holder including fuse
- 4x 2/2 way valves 1/4 with pressure sensors
- 25 meter 6mm PU hose in black
- all fittings including check valve and safety valve
- water separator
- emergency filling valves

suitable for:
Opel Kadett E incl. -CC, -Cabriolet
not for caravan, van models
year of manufacture 1984 - 1991
maximum front axle load: 785kg
maximum rear axle load: 725kg

Approval:

Including parts report (§19.3)

Implementation notes:

Excluding box models / caravan

Notes:

VA shock absorbers must be sent in after purchase/order confirmation.
Only completely dismantled and cleaned strut housings can be processed, i.e. wheel bearings, wheel hubs must be removed before shipping. Damaged goods will be returned for a fee!

Front suspension struts must be sent after purchase / order confirmation.
Only fully dismantled and cleaned spring housing can be machined, wheel bearings, wheel hubs must be removed before shipment.
Damaged goods will be returned for a fee!

Axle:

-

KeyType number:

600,601,602,603,604,605,606,607,608,609,610,611,612,613,614,615,616,617,618,619,620,621,622,623,624,625,626,627,628,629,630,646,4792,4964,7167,7168,7169,7171,7172,7173,7174,7175,8579,8905,8906,10856,12345,13549,15983,18868,27639