*329 604

Wisefab

WISEFAB rear track kit for Mitsubishi Lancer Evo 7/8/9

Mitsubishi EVO is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. On asphalt the ride height doesn’t have to be as high as on gravel. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is bad, then it decreases mechanical grip and also influenses aerodynamical grip as kinematics supports less roll squat and pitch. The Wisefab kit would bring the RC, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.

Nov izdelek

Razprodano

4.689,50 € z DDV

Žal izdelek začasno ni na voljo. Prosim izberite drugega.

Povpraševanje o izdelku

Povpraševanje o izdelku

WISEFAB rear track kit for Mitsubishi Lancer Evo 7/8/9

WISEFAB rear track kit for Mitsubishi Lancer Evo 7/8/9

Mitsubishi EVO is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. On asphalt the ride height doesn’t have to be as high as on gravel. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is bad, then it decreases mechanical grip and also influenses aerodynamical grip as kinematics supports less roll squat and pitch. The Wisefab kit would bring the RC, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.

Vprašanje o tem izdelku pošljite lastniku trgovine.

* Obvezna polja

  ali  Prekliči

Notify me

Notify me about the stock

WISEFAB rear track kit for Mitsubishi Lancer Evo 7/8/9

WISEFAB rear track kit for Mitsubishi Lancer Evo 7/8/9

To be informed about product update via email, fill out the form.

* Required

  or  Cancel

Za samodejne informacije o zalogah izdelkov,
kliknite na "Obvestite me, ko bo na voljo".

WFE81   

Mitsubishi EVO is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. On asphalt the ride height doesn’t have to be as high as on gravel. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is bad, then it decreases mechanical grip and also influenses aerodynamical grip as kinematics supports less roll squat and pitch. The Wisefab kit would bring the RC, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.

Product Features:

  • To suit Subaru Impreza WRX and WRX STI (1992 - 2013)
  • Corrected roll centre
  • Corrected camber curve
  • Corrected anti-Squat
  • Weight saving over OEM components
  • High strength steel construction

 

15 kg of total front and rear weight reduction over original components and still maintaining required strength and stiffness

7075-T6 aluminium billet CNC knuckles and with optimized design and all double shear connections provide low weight and high strenght. All the rear links and arms are made of high strength steel.

CrMo rod ends and sphericals used instead of rubber bushings

Camber and bumpsteer adjustments.

Rear Camber adjustment is buit into the upright and it is very easy to use at the trackside.

Also possibility to adjust bumpsteer at the upright

The standard 17“ or bigger wheel can be used. If standard wheels are used, then there are no modifications needed for bodywork. If the wheels are wider to outside, then some bodywork should be done to have enough wheel clearance for bump travel.

Brakes can be used from EVO 7, 8 9, or 10. There are 2 caliper attachment possibilities for rear.

EVO CV joints are known to be very good to handle big power, but for any case if power and grip exeed their limits, then uprights have room for bigger CV joint if needed.

Adjustable antiroll bar (swaybar) motion ratio. There are 3 possibilities for antiroll bar drop link attachments. Changing antiroll bar motion ratio is quick and easy way to tune your car understeer/oversteer

Other components, packaging and clearance.

This kit assumes coilovers

Minimum rim size is 17“

Original wheel speed sensor can be used

Podatki

VrstaLock kit

Napiši mnenje

Napiši mnenje







  ali  Prekliči

Did not find your question?
Enter new question
Do you have a question? Search for an answer.




ZnamkaModelSprememba
MitsubishiLancer IX (CS) (2003 - 2008)
MitsubishiLancer VII (CKA/CMA) (1995 - 2000)
MitsubishiLancer VIII (CK/CM) (1995 - 2002)

Recent posts

Zasloni RWD POWER

Motosportni zasloni za spremljanje parametrov motorja
Read more
Dvigalke in dovozne rampe

Najpomembnejši pomočnik v garaži – dvigalka!
Read more
Garrett Powermax za 1.9 TDI motorje

Plug & Play rešitev za povečanje moči
Read more
Karbonske sani EVENTURI

Namestitev karbonskega dovoda EVENTURI na BMW F90 M5 COMPETITION LCI.
Read more
NAMESTITEV ŠPORTNEGA VOLANA

Kako namestiti športni volan? Kaj vse je potrebno in kakšne so prednosti? Več na blogu..
Read more
MEET & GREET RACE-SHOP

KAKO JE BILO?!
Read more
Kako je videti za vrati trgovine? Zakulisje iz RACESHOP-a.

DJ Lucky Boy je razkril, kako to deluje v naši državi, in se s fotoaparatom odpravil tja, kamor še nihče ni.
Read more
Pripnite se!

Varnostni pasovi izboljšujejo varnost in vizualni videz notranjosti za hobi in cestno uporabo.
Read more
Kakšno darilo izbrati za navdušenca nad tuningom?

Tipi daril za pod jelko!
Read more

Kategorije Proizvajalci

Nalagam...