TA-Technix airride kit with air management for Audi Coupe Typ 81

TA Technix Air Damper Set + TA Technix Air Management with Air Generation Kit

The multi-function display is operated intuitively by means of a freely positionable rotary knob / potentiometer.
The electronic, pressure-based control unit has the option of storing 4 freely configurable bellows pressures / ride heights on an axle-by-axle basis.

With the help of the enclosed operating instructions and the simple menu navigation, the following additional functions, among others, can be used:

- 4 driving heights
- Adjustment of the ride height with ignition on and off (autolevel)
- Axially adjustable excess bellows pressure for optimum adjustment of the ride height
- Protection against foreign use (offers the possibility to lock the system at the desired ride height within 3 seconds)
- maximum as well as minimum tank pressure (adjustable)
- Protection of the on-board power supply through definable upper and lower limits of the on-board voltage
- freely configurable valve times
- Modification of the control unit lighting / ECU lighting
- Minimum pressure of the front and rear axle (falling below this level triggers a visual warning signal and is necessary for TÜV registration)

includes:
- Multifunctional display
- Rotary knob / potentiometer including 4 caps in black, red, blue and silver
- anti-reflective foil
- prefabricated wiring harness
- Control unit / ECU
- 3 update cables
- TA Technix 444C compressor in chrome
- 19 litre chrome tank
- Electronics set including compressor relay
- Fuse holder including fuse
- 4x 2/2 way valves 1/4 with pressure sensors
- 25 meter 6mm PU hose in black
- all fittings including check valve and safety valve
- water separator
- emergency filling valves

suitable for:
Audi 80+90, Type 81, B2
Coupe, Type 81
excl. Quattro
Year of manufacture 1978 - 1988

Volkswagen Passat, -staged rear, - Variant, Type 32B
excl. Syncro
Year of construction 1979 - 1989

Approval:

Without approval (not permitted in the area of the STVZO)

Implementation notes:

Excluding Syncro / Quattro models

Notes:

With this system, it is not necessary to send in the original front shock absorbers for the conversion. With the help of a welding sleeve and detailed installation instructions included with the order, the conversion of the air shock absorbers can be carried out by a professional garage.

Axle:

-

KeyType number:

1082,1080,12965,5608,1077,5763,5762,1068,1066,1059,1057,1063,1062,17980,1056,18203,1055,1357,1358,1356,10913,1355,1354,5066,1353,5815,1352,1351,1065,12970,1473,1474,1472,5992,6249,1707,1706,1705,1704,1702,1701,1700,1699,1698,1697,17977,1696,1695,1694,18625,1693,1692,5029,119206,5027,5028,6250,5025,5026,6251,1936,1935,1934,1932,1931,1930,6260,1929,1927,17975,1926,1925,1924,1923,18626,1922,1921