MTS STANCE SERIES coilover kit for Audi A3 (8P) 05/03 - 08/12 (Inox)

Thanks to increased stiffness compared to the Street series, it allows for precise adjustment of the vehicle height and minimal wheel-arch distance. Dedicated to users who value increased suspension stiffness and the ability to lower the vehicle further.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Product Information:

• Suitable for: Audi A3 (8P)
• Type: 8P1
• Engine: 1.2 TFSI / 1.2 TSI / 1.2 TSI 16V / 1.4 / 1.4 16V / 1.4 FSI / 1.4 TFSI / 1.4 TSI / 1.6 / 1.6 E-Power / 1.6 FSI / 1.6 LPG / 1.6 MPi / 1.6 TDI / 1.6 TDI 4motion / 1.6 TDI 4x4 / 1.8 TFSI / 1.8 TFSI quattro / 1.8 TSI / 1.8 TSI 4x4 / 1.9 TDI / 1.9 TDI 4motion / 1.9 TDI 4x4 / 2 / 2.0 Cupra R / 2.0 FSI / 2.0 FSI 4motion / 2.0 FSI 4x4 / 2.0 GTI / 2.0 GTi / 2.0 R / 2.0 R 4motion / 2.0 SDI / 2.0 TDI / 2.0 TDI 16V / 2.0 TDI 16V 4WD / 2.0 TDI 16V 4motion / 2.0 TDI 16V 4x4 / 2.0 TDI 16V quattro / 2.0 TDI 4motion / 2.0 TDI 4x4 / 2.0 TDI quattro / 2.0 TFSI / 2.0 TFSI 4motion / 2.0 TFSI 4x4 / 2.0 TFSI quattro / 2.0 TSI / 2.0 TTS quattro / 2.5 / 2.5 RS quattro / 3.2 R32 4motion / 3.2 V6 / 3.2 V6 quattro / 3.6 V6 / Blue E-Motion / S3 quattro
• Production year: 05/03 - 08/12
• TÜV certificate: yes
• Maximum loading on front axle: 1036 - 1170 kg
• Maximum loading on rear axle: -1150 kg
• Lowering (front / rear axle): 35 - 70 mm / 35 - 60 mm
• Housing: Inox treatment
• Camberplates front: not included /
• Camberplates rear: not included

Additional information:

2 - Front and rear axle height adjustable (threaded shock absorber housing)., 8 - Not for 4x4., 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

Extra notes: n/a