STROKOVNO SVETOVANJE
od 9. do 15. ure
Ni izdelkov
Brezplačna dostava! Dostava
0,00 €Cena skupaj
Izdelek je bil uspešno dodan v vašo košarico
( ks)
Nakúpte ešte za a doručenie máte zdarma.
*392 131
TWIN DISC CLUTCH SET FOR BMW M50/ M52/ M54/ S50/ S54 engine and M50/ M52/ M54/ M3 gearbox 23x29-10N STAGE 4
Set prepared for the most powerful professional drift and drag cars, can handle up to ~1200-1400 Nm of torque.
Nov izdelek
M50TDSTG4
Pripomočki
Set prepared for the most powerful professional drift and drag cars, can handle up to ~1200-1400 Nm of torque.
- Set consist of single mass twin disc clutch set, throwout bearing and all needed bolts (12.9 class)
- Probably the best offer on the tuning market
- 100% CNC machined parts - MADE IN UE
- Precision machining and alignment assures precise fit
- MONOBLOCK single mass flywheel - weight ~ 6.4 kgs.
- Rotating assembly weight ~ 13.2 kgs. (flywheel + middle plate + pressure plate)
- Custom made and lightweight 240 mm clutch discs - steel base + LUK's 8090s friction pads
- Sachs Performance 883082001243 pressure plate without SAC system
- Heat-resistant CNC machined clutch discs spacer/middle plate
- Clutch sets are fully balanced - END TO END - flywheel + middle plate + pressure plate together in accordance to the G6.3 class and up to 8000 rpm. Each clutch set is delivered with unique balance protocol
- Thanks to ultimate design and quality of the middle plate it is not making any noises when you press the clutch pedal. It will also not get stuck when gets heat because it is not touching the flywheel anywhere
- Works and engages smooth like an OEM clutch set
- Fits to following BMW engines: M50, M52, M54, S50, S52, S54 with ZF/GETRAG M50, M52, M54 5 speed and E36 M3 6 speed gearboxes - 23x29-10N spline shaft
- Set will not fit to the lift version of M54B30 with 6 speed gearbox
- Set will not fit to the ZF 5 speed N47M, M57 and E46 M3 gearboxes spline shaft 28x35-10N
- Perfect for high power turbocharged engines
- Set can handle up to ~1200-1400 Nm of torque for regular cars
- For entry level drifting needs up to ~1000 Nm - we recommend to keep torque reserve. In case of lot of clutch kicks we highly recommend to choose stage 2 or 4 version based on sintered clutch discs
- Professional installation is necessary + break-in procedure required - at least 1000 km or 5000 gear shifts
- Our flywheels always have got starter gear mounted on it (monoblock solution)
- All used parts are typical - it means that whole set can be cheaply and fast renewed
- Napiši mnenje
Podatki
| Znamka | BMW |
Did not find your question?
Enter new question Do you have a question? Search for an answer.
category
Kako namestiti športni volan? Kaj vse je potrebno in kakšne so prednosti? Več na blogu..
DJ Lucky Boy je razkril, kako to deluje v naši državi, in se s fotoaparatom odpravil tja, kamor še nihče ni.
Varnostni pasovi izboljšujejo varnost in vizualni videz notranjosti za hobi in cestno uporabo.
Kategorije Proizvajalci
Zadnje ogledano
-
TWIN DISC CLUTCH SET...
Set prepared for the most powerful...
2025 race-shop
WATCHDOG_OK
