MTS STANCE SERIES coilover kit for BMW 5 (E28) 05/81 - 12/87 (Inox)

Thanks to increased stiffness compared to the Street series, it allows for precise adjustment of the vehicle height and minimal wheel-arch distance. Dedicated to users who value increased suspension stiffness and the ability to lower the vehicle further.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Product Information:

• Suitable for: BMW 5 (E28)
• Type: E28
• Engine: 518 / 518 i / 520 i / 524 d / 524 td / 525 e / 525 i / 528 i / 535 i / 628 CSi / 633 CSi / 635 CSi / M 635 CSi
• Production year: 05/81 - 12/87
• TÜV certificate: no
• Maximum loading on front axle: -930 kg
• Maximum loading on rear axle: -1030 kg
• Lowering (front / rear axle): 25 - 110 mm / 25 - 90 mm
• Housing: Inox treatment
• Camberplates front: yes included /
• Camberplates rear: not included

Additional information:

2 - Front and rear axle height adjustable (threaded shock absorber housing)., 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 26 - Independent height adjustment at the lower brackets on the front dampers., 28 - Set includes 2x upper "camber plates" on the front axle., 29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual., 32 - In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set., 33 - Including M-Technik., 65 - Suspension compatible only with a rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required., 66 - In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.

Extra notes: strut diameter at the front axle of 55 mm